Custom Formulations Tailored For Your Needs
Numerous Ingredients
Medications
All Trace Minerals Available
Commercial Products
Formulations for Total Mixed Rations
CTS Grower Liquid MN
Type B Medicated Feed
Liquid mineral supplement designed to be fed to growing beef or dairy cattle in dry lot, feedlot, or on pasture. For increased rate of weight gain. For improved feed efficiency in cattle fed in confinement for slaughter. For the prevention and control of coccidiosis due to Eimeria bovis and Eimeria zuernii.
ACTIVE DRUG INGREDIENT:
Monensin……………………………….400 g/ton
GUARANTEED ANALYSIS
Crude Protein…….………………..…...….….Min. 27.00%
(Includes not more than 23.75% equivalent crude protein from NPN).
Crude Fat……………………….……...…...…. Min. 1.00%
Calcium………….Min. 11.00%........................Max. 13.2%
Phosphorous………………………...…….…...Min. 0.25%
Salt..………Min. 4.75%………………….........Max. 5.75%
Potassium…….…………………….....……….Min. 0.40%
Magnesium…….………………………....…….Min. 1.40%
Copper……….………………......………….Min. 270 ppm
Selenium…….……………………....…….Min. 3.825 ppm
Zinc…..….…………………….....……….Min. 1,350 ppm
Vitamin A…..….……………….……….Min. 27,000 IU/lb
INGREDIENTS
Calcium Carbonate, Processed Grain By-Products, Dolomitic Limestone, Urea, Dry Clay, TSPP, Water, Salt, Zinc Sulfate, Manganese Sulfate, Copper Sulfate, Zinc Hydroxychloride, Basic Copper Chloride, Vitamin E Supplement, Vitamin A Supplement, Vitamin D Supplement, Sodium Selenite, Ethylenediamine Dihydroidide, Cobalt Carbonate, Anhydrous Ammonia.
FEEDING DIRECTIONS
CTS Grower Liquid MN contains 200 mg Monensin per pound of product and should be mixed with grain and/or roughage and fed to achieve an average intake of 1 lb. per animal daily. For increased rate of weight gain, target a feeding rate of 0.25 to 1.00 lbs. CTS Grower Liquid MN to supply not less than 50 nor more than 200 mg Monensin per head per day. For the prevention and control of coccidiosis, feed at a rate to provide 0.14 to 0.42 mg Monensin per lb. of body weight per day, depending on severity, up to a maximum of 200 mg Monensin per head per day. For improved feed efficiency, target a feeding rate of 0.25 to 2.4 lbs. CTS Grower Liquid MN to supply not less than 50 nor more than 480 mg Monensin per head per day. Provide fresh, clean water and good-quality forage at all times.
Formulations for Lick Wheel Tanks
CTS Range Liquid
Liquid mineral supplement designed to be fed to beef cattle grazing pasture
GUARANTEED ANALYSIS
Crude Protein…….………………..…...….….Min. 23.75%
(Includes not more than 16.50% equivalent crude protein from NPN).
Crude Fat……………………….……...…...…. Min. 0.40%
Calcium………….Min. 3.25%........................Max. 3.75%
Phosphorous………………………...…….…...Min. 0.25%
Salt..………Min. 3.25%………………….........Max. 3.75%
Potassium…….…………………….....……….Min. 0.25%
Magnesium…….………………………....…….Min. 0.40%
Copper……….………………......………….Min. 135 ppm
Selenium…….……………………....…….Min. 2.25 ppm
Zinc…..….…………………….....……….Min. 720 ppm
Vitamin A…..….……………….……….Min. 27,000 IU/lb
INGREDIENTS
Processed Grain By-Products, Calcium Carbonate, Urea, Dry Clay, TSPP, Water, Salt, Zinc Sulfate, Manganese Sulfate, Copper Sulfate, Zinc Hydroxychloride, Basic Copper Chloride, Vitamin E Supplement, Vitamin A Supplement, Vitamin D Supplement, Sodium Selenite, Ethylenediamine Dihydroidide, Cobalt Sulfate, Anhydrous Ammonia.
FEEDING DIRECTIONS
CTS Range Liquid should be fed to beef cattle only at a target average consumption of 2.0 lbs. per animal daily. Feed as directed by your nutritionist or feed manufacturer representative and place in a high or low traffic area to target specified rate of consumption. Provide fresh, clean water and good-quality forage at all times.
CAUTION
Follow label directions. Consumption of selenium should not exceed 3 mg per animal daily.
WARNING
This product contains added copper and should not be fed to sheep or other species with susceptibility to copper toxicity. Store in a dry, well-ventilated area protected from rodents and insects. DO NOT feed moldy or insect infested feed to animals as it may cause illness, abortion, or death.
CTS Range Liquid Garlic
Liquid mineral supplement designed to be fed to beef cattle grazing pasture
GUARANTEED ANALYSIS
Crude Protein…….………………..…...….….Min. 23.75%
(Includes not more than 16.50% equivalent crude protein from NPN).
Crude Fat……………………….……...…...…. Min. 0.40%
Calcium………….Min. 3.25%........................Max. 3.75%
Phosphorous………………………...…….…...Min. 0.25%
Salt..………Min. 3.25%………………….........Max. 3.75%
Potassium…….…………………….....……….Min. 0.25%
Magnesium…….………………………....…….Min. 0.40%
Copper……….………………......………….Min. 135 ppm
Selenium…….……………………....…….Min. 2.25 ppm
Zinc…..….…………………….....……….Min. 720 ppm
Vitamin A…..….……………….……….Min. 27,000 IU/lb
INGREDIENTS
Processed Grain By-Products, Glycerin, Calcium Carbonate, Urea, Dry Clay, TSPP, Water, Salt, Zinc Sulfate, Manganese Sulfate, Copper Sulfate, Zinc Hydroxychloride, Basic Copper Chloride, Vitamin E Supplement, Vitamin A Supplement, Vitamin D Supplement, Sodium Selenite, Ethylenediamine Dihydroidide, Cobalt Sulfate, Magnesium Mica, Calcium Carbonate, Corn Cob Meal, Natural Garlic Flavor, Anhydrous Ammonia.
FEEDING DIRECTIONS
CTS Range Liquid Garlic should be fed to beef cattle only at a target average consumption of 2.0 lbs. per animal daily. Feed as directed by your nutritionist or feed manufacturer representative and place in a high or low traffic area to target specified rate of consumption. Provide fresh, clean water and good-quality forage at all times.
CAUTION
Follow label directions. Consumption of selenium should not exceed 3 mg per animal daily.
WARNING
This product contains added copper and should not be fed to sheep or other species with susceptibility to copper toxicity. Store in a dry, well-ventilated area protected from rodents and insects. DO NOT feed moldy or insect infested feed to animals as it may cause illness, abortion, or death.
CTS Finisher Liquid MT
Type B Medicated Feed
CAUTION: Federal law restricts medicated feed containing this veterinary feed directive (VFD) drug to use by or on the order of a licensed veterinarian.
Liquid mineral supplement designed to be fed to cattle fed in confinement for slaughter. For improved feed efficiency. For the prevention and control of coccidiosis due to Eimeria bovis and Eimeria zuernii. For reduction of incidence of liver abscesses caused by Fusobacterium necrophorum and Arcanobacterium (Actinomyces) pyogenes.
ACTIVE DRUG INGREDIENT:
Monensin……………………………….520 g/ton
Tylosin Phosphate……………………………….144 g/ton
GUARANTEED ANALYSIS
Crude Protein…….………………..…...….….Min. 46.00%
(Includes not more than 45.00% equivalent crude protein from NPN).
Crude Fat……………………….……...…...…. Min. 1.50%
Calcium………….Min. 9.50%..........................Max. 11.40%
Phosphorous………………………...…….…...Min. 0.01%
Salt..………Min. 5.50%………………….........Max. 6.60%
Potassium…….…………………….....……….Min. 1.50%
Magnesium…….………………..……....…….Min. 0.50%
Copper……….………………...………….Min. 238.5 ppm
Selenium…….…………………..…....…….Min. 3.96 ppm
Zinc…..….……………………......……….Min. 1,440 ppm
Vitamin A…..….……………….……….Min. 22,500 IU/lb
INGREDIENTS
Processed Grain By-Products, Calcium Carbonate, Urea, Dolomitic Limestone, Salt, Dry Clay, TSPP, Water, Potassium Chloride, Zinc Sulfate, Manganese Sulfate, Copper Sulfate, Zinc Hydroxychloride, Basic Copper Chloride, Vitamin E Supplement, Vitamin A Supplement, Vitamin D Supplement, Sodium Selenite, Ethylenediamine Dihydroidide, Cobalt Carbonate, Anhydrous Ammonia.
FEEDING DIRECTIONS
Maintain pH between 4.5 and 6.0. CTS Finisher Liquid MT contains 260 mg Monensin and 72 mg Tylosin Phosphate per pound of product and should be fed as directed by your nutritionist. For the prevention and control of coccidiosis, feed at a rate to provide 0.14 to 0.42 mg Monensin per lb. of body weight per day, depending on severity, up to a maximum of 200 mg Monensin per head per day. For improved feed efficiency, target a feeding rate to supply not less than 50 nor more than 480 mg Monensin per head per day. For reduction of incidence of liver abscesses, feed at a rate to provide 60-90 mg per animal daily of Tylosin Phosphate. Provide fresh, clean water and good-quality forage at all times.
CTS Hi Fat Range Liquid
Liquid mineral supplement designed to be fed to beef cattle grazing pasture
GUARANTEED ANALYSIS
Crude Protein…….………………..…...….….Min. 23.75%
(Includes not more than 16.50% equivalent crude protein from NPN).
Crude Fat……………………….……...…...…. Min. 9.75%
Calcium………….Min. 2.75%........................Max. 3.25%
Phosphorous………………………...…….…...Min. 0.25%
Salt..………Min. 3.25%………………….........Max. 3.75%
Potassium…….…………………….....……….Min. 0.25%
Magnesium…….………………………....…….Min. 0.40%
Copper……….………………......………….Min. 135 ppm
Selenium…….……………………....…….Min. 2.25 ppm
Zinc…..….…………………….....……….Min. 720 ppm
Vitamin A…..….……………….……….Min. 27,000 IU/lb
INGREDIENTS
Processed Grain By-Products, Calcium Carbonate, Urea, Dry Clay, TSPP, Water, Salt, Zinc Sulfate, Manganese Sulfate, Copper Sulfate, Zinc Hydroxychloride, Basic Copper Chloride, Vitamin E Supplement, Vitamin A Supplement, Vitamin D Supplement, Sodium Selenite, Ethylenediamine Dihydroidide, Cobalt Sulfate, Anhydrous Ammonia.
FEEDING DIRECTIONS
CTS Hi Fat Range Liquid should be fed to beef cattle only at a target average consumption of 2.0 lbs. per animal daily. Feed as directed by your nutritionist or feed manufacturer representative and place in a high or low traffic area to target specified rate of consumption. Provide fresh, clean water and good-quality forage at all times.
CAUTION
Follow label directions. Consumption of selenium should not exceed 3 mg per animal daily.
WARNING
This product contains added copper and should not be fed to sheep or other species with susceptibility to copper toxicity. Store in a dry, well-ventilated area protected from rodents and insects. DO NOT feed moldy or insect infested feed to animals as it may cause illness, abortion, or death.